午夜在线精-午夜在线精品国产-午夜在线精品无-午夜在线看的免费网站-午夜在线看片-午夜在线免费观看-午夜在线免费观看视频-午夜在线视

Introduction: Rotary shot blasting machine is mainly suitable for the production of surface cleaning of small and medium-sized workpieces. This specification of equipment is suitable for engine connecting rods, gears, diaphragm springs, etc.

Features:

1. The rotary table shot blasting machine is mainly composed of a chamber body, a turntable, a transmission system, a separator, a hoist, a shot conveying device, a shot blasting device, and other parts. A high-speed rotating shot blasting device is installed at the top of the chamber to shoot the workpiece in the appropriate direction. When the workpiece rotates out of the chamber body with the turntable, the cleaning effect can be directly seen for the next step of work.

2. By driving the scraper plate to rotate through the transmission system, the sand particles are sent to the lower part of the elevator through the flow tube, and then lifted by the elevator to the separator for separation. The intact particles are continuously used by the shot blasting machine through the conveying tube and gate, while the crushed particles and dust enter other corresponding pipelines for secondary separation.

3. The transmission mechanism of the rotary table shot blasting machine is driven by a cycloidal pinwheel reducer to drive the friction wheel, which generates friction transmission with the turntable through a clutch mechanism, making the turntable rotate smoothly. When the workpiece is moved out of the room, it can be used for direct flipping adjustment and cleaned workpieces; You can also adjust the clutch handle at any time according to the different workpieces to be cleaned and the difficulty of loading and unloading the workpieces, to disengage the friction wheel from the turntable. That is, the turntable stops and adjusts the workpiece before changing the handle position, and then the turntable starts rotating again.